Media Seek Slider Test Plan (21 tests)

Filter tests by covered assistive technology

Supporting Documentation

Test 1: Navigate forwards to a slider in reading mode

JAWS

Instructions

  1. Configure JAWS with default settings. For help, read Configuring Screen Readers for Testing.
  2. Activate the "Open test page" button, which opens the example to test in a new window and runs a script that sets focus on a link before the slider.
  3. With the reading cursor on the 'Navigate forwards from here' link, navigate to the 'Seek' slider. Do this with each of the following commands or command sequences.
    • Down Arrow, then Down Arrow, then Down Arrow
    • Tab

Down Arrow, then Down Arrow, then Down Arrow: 7 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Role 'slider' is conveyed
MUST Name 'Seek' is conveyed
MUST Textual value '1 Minute 30 Seconds of 5 Minutes' is conveyed
MUST Numeric value '90' is not conveyed
MUST Orientation 'horizontal' is conveyed
MUST Minimum value '0' is not conveyed
MUST Maximum value '300' is not conveyed

Tab: 7 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Role 'slider' is conveyed
MUST Name 'Seek' is conveyed
MUST Textual value '1 Minute 30 Seconds of 5 Minutes' is conveyed
MUST Numeric value '90' is not conveyed
MUST Orientation 'horizontal' is conveyed
MUST Minimum value '0' is not conveyed
MUST Maximum value '300' is not conveyed

NVDA

Instructions

  1. Configure NVDA with default settings. For help, read Configuring Screen Readers for Testing.
  2. Activate the "Open test page" button, which opens the example to test in a new window and runs a script that sets focus on a link before the slider.
  3. With the reading cursor on the 'Navigate forwards from here' link, navigate to the 'Seek' slider. Do this with each of the following commands or command sequences.
    • Down Arrow, then Down Arrow
    • Tab

Down Arrow, then Down Arrow: 7 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Role 'slider' is conveyed
MUST Name 'Seek' is conveyed
MUST Textual value '1 Minute 30 Seconds of 5 Minutes' is conveyed
MUST Numeric value '90' is not conveyed
MUST Orientation 'horizontal' is conveyed
MUST Minimum value '0' is not conveyed
MUST Maximum value '300' is not conveyed

Tab: 7 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Role 'slider' is conveyed
MUST Name 'Seek' is conveyed
MUST Textual value '1 Minute 30 Seconds of 5 Minutes' is conveyed
MUST Numeric value '90' is not conveyed
MUST Orientation 'horizontal' is conveyed
MUST Minimum value '0' is not conveyed
MUST Maximum value '300' is not conveyed

Test 2: Navigate backwards to a slider in reading mode

JAWS

Instructions

  1. Configure JAWS with default settings. For help, read Configuring Screen Readers for Testing.
  2. Activate the "Open test page" button, which opens the example to test in a new window and runs a script that sets focus on a link after the slider.
  3. With the reading cursor on the 'Navigate backwards from here' link, navigate to the 'Seek' slider. Do this with each of the following commands or command sequences.
    • Up Arrow, then Up Arrow
    • Shift+Tab

Up Arrow, then Up Arrow: 7 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Role 'slider' is conveyed
MUST Name 'Seek' is conveyed
MUST Textual value '1 Minute 30 Seconds of 5 Minutes' is conveyed
MUST Numeric value '90' is not conveyed
MUST Orientation 'horizontal' is conveyed
MUST Minimum value '0' is not conveyed
MUST Maximum value '300' is not conveyed

Shift+Tab: 7 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Role 'slider' is conveyed
MUST Name 'Seek' is conveyed
MUST Textual value '1 Minute 30 Seconds of 5 Minutes' is conveyed
MUST Numeric value '90' is not conveyed
MUST Orientation 'horizontal' is conveyed
MUST Minimum value '0' is not conveyed
MUST Maximum value '300' is not conveyed

NVDA

Instructions

  1. Configure NVDA with default settings. For help, read Configuring Screen Readers for Testing.
  2. Activate the "Open test page" button, which opens the example to test in a new window and runs a script that sets focus on a link after the slider.
  3. With the reading cursor on the 'Navigate backwards from here' link, navigate to the 'Seek' slider. Do this with each of the following commands or command sequences.
    • Up Arrow, then Up Arrow
    • Shift+Tab

Up Arrow, then Up Arrow: 7 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Role 'slider' is conveyed
MUST Name 'Seek' is conveyed
MUST Textual value '1 Minute 30 Seconds of 5 Minutes' is conveyed
MUST Numeric value '90' is not conveyed
MUST Orientation 'horizontal' is conveyed
MUST Minimum value '0' is not conveyed
MUST Maximum value '300' is not conveyed

Shift+Tab: 7 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Role 'slider' is conveyed
MUST Name 'Seek' is conveyed
MUST Textual value '1 Minute 30 Seconds of 5 Minutes' is conveyed
MUST Numeric value '90' is not conveyed
MUST Orientation 'horizontal' is conveyed
MUST Minimum value '0' is not conveyed
MUST Maximum value '300' is not conveyed

Test 3: Navigate forwards to a slider in interaction mode

JAWS

Instructions

  1. Configure JAWS with default settings. For help, read Configuring Screen Readers for Testing.
  2. Activate the "Open test page" button, which opens the example to test in a new window and runs a script that sets focus on a link before the slider.
  3. With focus on the 'Navigate forwards from here' link, navigate to the 'Seek' slider. Do this with each of the following commands or command sequences.
    • Tab

Tab: 7 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Role 'slider' is conveyed
MUST Name 'Seek' is conveyed
MUST Textual value '1 Minute 30 Seconds of 5 Minutes' is conveyed
MUST Numeric value '90' is not conveyed
MUST Orientation 'horizontal' is conveyed
MUST Minimum value '0' is not conveyed
MUST Maximum value '300' is not conveyed

NVDA

Instructions

  1. Configure NVDA with default settings. For help, read Configuring Screen Readers for Testing.
  2. Activate the "Open test page" button, which opens the example to test in a new window and runs a script that sets focus on a link before the slider.
  3. With focus on the 'Navigate forwards from here' link, navigate to the 'Seek' slider. Do this with each of the following commands or command sequences.
    • Tab

Tab: 7 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Role 'slider' is conveyed
MUST Name 'Seek' is conveyed
MUST Textual value '1 Minute 30 Seconds of 5 Minutes' is conveyed
MUST Numeric value '90' is not conveyed
MUST Orientation 'horizontal' is conveyed
MUST Minimum value '0' is not conveyed
MUST Maximum value '300' is not conveyed

Test 4: Navigate backwards to a slider in interaction mode

JAWS

Instructions

  1. Configure JAWS with default settings. For help, read Configuring Screen Readers for Testing.
  2. Activate the "Open test page" button, which opens the example to test in a new window and runs a script that sets focus on a link after the slider.
  3. With focus on the 'Navigate backwards from here' link, navigate to the 'Seek' slider. Do this with each of the following commands or command sequences.
    • Shift+Tab

Shift+Tab: 7 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Role 'slider' is conveyed
MUST Name 'Seek' is conveyed
MUST Textual value '1 Minute 30 Seconds of 5 Minutes' is conveyed
MUST Numeric value '90' is not conveyed
MUST Orientation 'horizontal' is conveyed
MUST Minimum value '0' is not conveyed
MUST Maximum value '300' is not conveyed

NVDA

Instructions

  1. Configure NVDA with default settings. For help, read Configuring Screen Readers for Testing.
  2. Activate the "Open test page" button, which opens the example to test in a new window and runs a script that sets focus on a link after the slider.
  3. With focus on the 'Navigate backwards from here' link, navigate to the 'Seek' slider. Do this with each of the following commands or command sequences.
    • Shift+Tab

Shift+Tab: 7 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Role 'slider' is conveyed
MUST Name 'Seek' is conveyed
MUST Textual value '1 Minute 30 Seconds of 5 Minutes' is conveyed
MUST Numeric value '90' is not conveyed
MUST Orientation 'horizontal' is conveyed
MUST Minimum value '0' is not conveyed
MUST Maximum value '300' is not conveyed

Test 5: Navigate forwards to a slider

VoiceOver for macOS

Instructions

  1. Configure VoiceOver with default settings. For help, read Configuring Screen Readers for Testing.
  2. Activate the "Open test page" button, which opens the example to test in a new window and runs a script that sets focus on a link before the slider.
  3. With focus on the 'Navigate forwards from here' link, navigate to the 'Seek' slider. Do this with each of the following commands or command sequences.
    • Control+Option+Right, then Control+Option+Right
    • Tab

Control+Option+Right, then Control+Option+Right: 7 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Role 'slider' is conveyed
MUST Name 'Seek' is conveyed
MUST Textual value '1 Minute 30 Seconds of 5 Minutes' is conveyed
MUST Numeric value '90' is not conveyed
MUST Orientation 'horizontal' is conveyed
MUST Minimum value '0' is not conveyed
MUST Maximum value '300' is not conveyed

Tab: 7 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Role 'slider' is conveyed
MUST Name 'Seek' is conveyed
MUST Textual value '1 Minute 30 Seconds of 5 Minutes' is conveyed
MUST Numeric value '90' is not conveyed
MUST Orientation 'horizontal' is conveyed
MUST Minimum value '0' is not conveyed
MUST Maximum value '300' is not conveyed

Test 6: Navigate backwards to a slider

VoiceOver for macOS

Instructions

  1. Configure VoiceOver with default settings. For help, read Configuring Screen Readers for Testing.
  2. Activate the "Open test page" button, which opens the example to test in a new window and runs a script that sets focus on a link after the slider.
  3. With focus on the 'Navigate backwards from here' link, navigate to the 'Seek' slider. Do this with each of the following commands or command sequences.
    • Ctrl+Option+Left, then Ctrl+Option+Left
    • Shift+Tab

Ctrl+Option+Left, then Ctrl+Option+Left: 7 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Role 'slider' is conveyed
MUST Name 'Seek' is conveyed
MUST Textual value '1 Minute 30 Seconds of 5 Minutes' is conveyed
MUST Numeric value '90' is not conveyed
MUST Orientation 'horizontal' is conveyed
MUST Minimum value '0' is not conveyed
MUST Maximum value '300' is not conveyed

Shift+Tab: 7 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Role 'slider' is conveyed
MUST Name 'Seek' is conveyed
MUST Textual value '1 Minute 30 Seconds of 5 Minutes' is conveyed
MUST Numeric value '90' is not conveyed
MUST Orientation 'horizontal' is conveyed
MUST Minimum value '0' is not conveyed
MUST Maximum value '300' is not conveyed

Test 7: Read information about a slider in reading mode

JAWS

Instructions

  1. Configure JAWS with default settings. For help, read Configuring Screen Readers for Testing.
  2. Activate the "Open test page" button, which opens the example to test in a new window and runs a script that sets focus on the slider.
  3. With the reading cursor on the 'Seek' slider, read information about the slider. Do this with each of the following commands or command sequences.
    • Insert+Tab
    • Insert+Up

Insert+Tab: 7 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Role 'slider' is conveyed
MUST Name 'Seek' is conveyed
MUST Textual value '1 Minute 30 Seconds of 5 Minutes' is conveyed
MUST Numeric value '90' is not conveyed
MUST Orientation 'horizontal' is conveyed
MUST Minimum value '0' is not conveyed
MUST Maximum value '300' is not conveyed

Insert+Up: 7 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Role 'slider' is conveyed
MUST Name 'Seek' is conveyed
MUST Textual value '1 Minute 30 Seconds of 5 Minutes' is conveyed
MUST Numeric value '90' is not conveyed
MUST Orientation 'horizontal' is conveyed
MUST Minimum value '0' is not conveyed
MUST Maximum value '300' is not conveyed

NVDA

Instructions

  1. Configure NVDA with default settings. For help, read Configuring Screen Readers for Testing.
  2. Activate the "Open test page" button, which opens the example to test in a new window and runs a script that sets focus on the slider.
  3. With the reading cursor on the 'Seek' slider, read information about the slider. Do this with each of the following commands or command sequences.
    • Insert+Tab
    • Insert+Up

Insert+Tab: 7 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Role 'slider' is conveyed
MUST Name 'Seek' is conveyed
MUST Textual value '1 Minute 30 Seconds of 5 Minutes' is conveyed
MUST Numeric value '90' is not conveyed
MUST Orientation 'horizontal' is conveyed
MUST Minimum value '0' is not conveyed
MUST Maximum value '300' is not conveyed

Insert+Up: 7 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Role 'slider' is conveyed
MUST Name 'Seek' is conveyed
MUST Textual value '1 Minute 30 Seconds of 5 Minutes' is conveyed
MUST Numeric value '90' is not conveyed
MUST Orientation 'horizontal' is conveyed
MUST Minimum value '0' is not conveyed
MUST Maximum value '300' is not conveyed

Test 8: Read information about a slider in interaction mode

JAWS

Instructions

  1. Configure JAWS with default settings. For help, read Configuring Screen Readers for Testing.
  2. Activate the "Open test page" button, which opens the example to test in a new window and runs a script that sets focus on the slider.
  3. With focus on the 'Seek' slider, read information about the slider. Do this with each of the following commands or command sequences.
    • Insert+Tab
    • Insert+Up

Insert+Tab: 7 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Role 'slider' is conveyed
MUST Name 'Seek' is conveyed
MUST Textual value '1 Minute 30 Seconds of 5 Minutes' is conveyed
MUST Numeric value '90' is not conveyed
MUST Orientation 'horizontal' is conveyed
MUST Minimum value '0' is not conveyed
MUST Maximum value '300' is not conveyed

Insert+Up: 7 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Role 'slider' is conveyed
MUST Name 'Seek' is conveyed
MUST Textual value '1 Minute 30 Seconds of 5 Minutes' is conveyed
MUST Numeric value '90' is not conveyed
MUST Orientation 'horizontal' is conveyed
MUST Minimum value '0' is not conveyed
MUST Maximum value '300' is not conveyed

NVDA

Instructions

  1. Configure NVDA with default settings. For help, read Configuring Screen Readers for Testing.
  2. Activate the "Open test page" button, which opens the example to test in a new window and runs a script that sets focus on the slider.
  3. With focus on the 'Seek' slider, read information about the slider. Do this with each of the following commands or command sequences.
    • Insert+Tab
    • Insert+Up

Insert+Tab: 7 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Role 'slider' is conveyed
MUST Name 'Seek' is conveyed
MUST Textual value '1 Minute 30 Seconds of 5 Minutes' is conveyed
MUST Numeric value '90' is not conveyed
MUST Orientation 'horizontal' is conveyed
MUST Minimum value '0' is not conveyed
MUST Maximum value '300' is not conveyed

Insert+Up: 7 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Role 'slider' is conveyed
MUST Name 'Seek' is conveyed
MUST Textual value '1 Minute 30 Seconds of 5 Minutes' is conveyed
MUST Numeric value '90' is not conveyed
MUST Orientation 'horizontal' is conveyed
MUST Minimum value '0' is not conveyed
MUST Maximum value '300' is not conveyed

Test 9: Read information about a slider

VoiceOver for macOS

Instructions

  1. Configure VoiceOver with default settings. For help, read Configuring Screen Readers for Testing.
  2. Activate the "Open test page" button, which opens the example to test in a new window and runs a script that sets focus on the slider.
  3. With focus on the 'Seek' slider, read information about the slider. Do this with each of the following commands or command sequences.
    • Control+Option+F3
    • Control+Option+F4

Control+Option+F3: 7 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Role 'slider' is conveyed
MUST Name 'Seek' is conveyed
MUST Textual value '1 Minute 30 Seconds of 5 Minutes' is conveyed
MUST Numeric value '90' is not conveyed
MUST Orientation 'horizontal' is conveyed
MUST Minimum value '0' is not conveyed
MUST Maximum value '300' is not conveyed

Control+Option+F4: 7 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Role 'slider' is conveyed
MUST Name 'Seek' is conveyed
MUST Textual value '1 Minute 30 Seconds of 5 Minutes' is conveyed
MUST Numeric value '90' is not conveyed
MUST Orientation 'horizontal' is conveyed
MUST Minimum value '0' is not conveyed
MUST Maximum value '300' is not conveyed

Test 10: Increment a slider by one step in interaction mode

JAWS

Instructions

  1. Configure JAWS with default settings. For help, read Configuring Screen Readers for Testing.
  2. Activate the "Open test page" button, which opens the example to test in a new window and runs a script that sets focus on the slider.
  3. With focus on the 'Seek' slider, set its value to 1 Minute 31 Seconds. Do this with each of the following commands or command sequences.
    • Right Arrow
    • Up Arrow

Right Arrow: 2 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Textual value '1 Minute 31 Seconds' is conveyed
MUST Numeric value '91' is not conveyed

Up Arrow: 2 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Textual value '1 Minute 31 Seconds' is conveyed
MUST Numeric value '91' is not conveyed

NVDA

Instructions

  1. Configure NVDA with default settings. For help, read Configuring Screen Readers for Testing.
  2. Activate the "Open test page" button, which opens the example to test in a new window and runs a script that sets focus on the slider.
  3. With focus on the 'Seek' slider, set its value to 1 Minute 31 Seconds. Do this with each of the following commands or command sequences.
    • Right Arrow
    • Up Arrow

Right Arrow: 2 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Textual value '1 Minute 31 Seconds' is conveyed
MUST Numeric value '91' is not conveyed

Up Arrow: 2 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Textual value '1 Minute 31 Seconds' is conveyed
MUST Numeric value '91' is not conveyed

Test 11: Increment a slider by one step

VoiceOver for macOS

Instructions

  1. Configure VoiceOver with default settings. For help, read Configuring Screen Readers for Testing.
  2. Activate the "Open test page" button, which opens the example to test in a new window and runs a script that sets focus on the slider.
  3. With focus on the 'Seek' slider, set its value to 1 Minute 31 Seconds. Do this with each of the following commands or command sequences.
    • Right Arrow
    • Up Arrow

Right Arrow: 2 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Textual value '1 Minute 31 Seconds' is conveyed
MUST Numeric value '91' is not conveyed

Up Arrow: 2 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Textual value '1 Minute 31 Seconds' is conveyed
MUST Numeric value '91' is not conveyed

Test 12: Decrement a slider by one step in interaction mode

JAWS

Instructions

  1. Configure JAWS with default settings. For help, read Configuring Screen Readers for Testing.
  2. Activate the "Open test page" button, which opens the example to test in a new window and runs a script that sets focus on the slider.
  3. With focus on the 'Seek' slider, set its value to 1 Minute 29 Seconds. Do this with each of the following commands or command sequences.
    • Left Arrow
    • Down Arrow

Left Arrow: 2 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Textual value '1 Minute 29 Seconds' is conveyed
MUST Numeric value '89' is not conveyed

Down Arrow: 2 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Textual value '1 Minute 29 Seconds' is conveyed
MUST Numeric value '89' is not conveyed

NVDA

Instructions

  1. Configure NVDA with default settings. For help, read Configuring Screen Readers for Testing.
  2. Activate the "Open test page" button, which opens the example to test in a new window and runs a script that sets focus on the slider.
  3. With focus on the 'Seek' slider, set its value to 1 Minute 29 Seconds. Do this with each of the following commands or command sequences.
    • Left Arrow
    • Down Arrow

Left Arrow: 2 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Textual value '1 Minute 29 Seconds' is conveyed
MUST Numeric value '89' is not conveyed

Down Arrow: 2 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Textual value '1 Minute 29 Seconds' is conveyed
MUST Numeric value '89' is not conveyed

Test 13: Decrement a slider by one step

VoiceOver for macOS

Instructions

  1. Configure VoiceOver with default settings. For help, read Configuring Screen Readers for Testing.
  2. Activate the "Open test page" button, which opens the example to test in a new window and runs a script that sets focus on the slider.
  3. With focus on the 'Seek' slider, set its value to 1 Minute 29 Seconds. Do this with each of the following commands or command sequences.
    • Left Arrow
    • Down Arrow

Left Arrow: 2 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Textual value '1 Minute 29 Seconds' is conveyed
MUST Numeric value '89' is not conveyed

Down Arrow: 2 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Textual value '1 Minute 29 Seconds' is conveyed
MUST Numeric value '89' is not conveyed

Test 14: Increment a slider by fifteen steps in interaction mode

JAWS

Instructions

  1. Configure JAWS with default settings. For help, read Configuring Screen Readers for Testing.
  2. Activate the "Open test page" button, which opens the example to test in a new window and runs a script that sets focus on the slider.
  3. With focus on the 'Seek' slider, set its value to 1 Minute 45 Seconds. Do this with each of the following commands or command sequences.
    • Page Up

Page Up: 2 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST textual value '1 Minute 45 Seconds' is conveyed
MUST Numeric value '105' is not conveyed

NVDA

Instructions

  1. Configure NVDA with default settings. For help, read Configuring Screen Readers for Testing.
  2. Activate the "Open test page" button, which opens the example to test in a new window and runs a script that sets focus on the slider.
  3. With focus on the 'Seek' slider, set its value to 1 Minute 45 Seconds. Do this with each of the following commands or command sequences.
    • Page Up

Page Up: 2 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST textual value '1 Minute 45 Seconds' is conveyed
MUST Numeric value '105' is not conveyed

Test 15: Increment a slider by fifteen steps

VoiceOver for macOS

Instructions

  1. Configure VoiceOver with default settings. For help, read Configuring Screen Readers for Testing.
  2. Activate the "Open test page" button, which opens the example to test in a new window and runs a script that sets focus on the slider.
  3. With focus on the 'Seek' slider, set its value to 1 Minute 45 Seconds. Do this with each of the following commands or command sequences.
    • Page Up

Page Up: 2 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST textual value '1 Minute 45 Seconds' is conveyed
MUST Numeric value '105' is not conveyed

Test 16: Decrement a slider by fifteen steps in interaction mode

JAWS

Instructions

  1. Configure JAWS with default settings. For help, read Configuring Screen Readers for Testing.
  2. Activate the "Open test page" button, which opens the example to test in a new window and runs a script that sets focus on the slider.
  3. With focus on the 'Seek' slider, set its value to 1 Minute 15 Seconds. Do this with each of the following commands or command sequences.
    • Page Down

Page Down: 2 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Textual value '1 Minute 15 Seconds' is conveyed
MUST Numeric value '75' is not conveyed

NVDA

Instructions

  1. Configure NVDA with default settings. For help, read Configuring Screen Readers for Testing.
  2. Activate the "Open test page" button, which opens the example to test in a new window and runs a script that sets focus on the slider.
  3. With focus on the 'Seek' slider, set its value to 1 Minute 15 Seconds. Do this with each of the following commands or command sequences.
    • Page Down

Page Down: 2 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Textual value '1 Minute 15 Seconds' is conveyed
MUST Numeric value '75' is not conveyed

Test 17: Decrement a slider by fifteen steps

VoiceOver for macOS

Instructions

  1. Configure VoiceOver with default settings. For help, read Configuring Screen Readers for Testing.
  2. Activate the "Open test page" button, which opens the example to test in a new window and runs a script that sets focus on the slider.
  3. With focus on the 'Seek' slider, set its value to 1 Minute 15 Seconds. Do this with each of the following commands or command sequences.
    • Page Down

Page Down: 2 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Textual value '1 Minute 15 Seconds' is conveyed
MUST Numeric value '75' is not conveyed

Test 18: Decrement a slider to the minimum value in interaction mode

JAWS

Instructions

  1. Configure JAWS with default settings. For help, read Configuring Screen Readers for Testing.
  2. Activate the "Open test page" button, which opens the example to test in a new window and runs a script that sets focus on the slider.
  3. With focus on the 'Seek' slider, set its value to 0 Seconds. Do this with each of the following commands or command sequences.
    • Home

Home: 2 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Textual value '0 Seconds' is conveyed
MUST Numeric value '0' is not conveyed

NVDA

Instructions

  1. Configure NVDA with default settings. For help, read Configuring Screen Readers for Testing.
  2. Activate the "Open test page" button, which opens the example to test in a new window and runs a script that sets focus on the slider.
  3. With focus on the 'Seek' slider, set its value to 0 Seconds. Do this with each of the following commands or command sequences.
    • Home

Home: 2 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Textual value '0 Seconds' is conveyed
MUST Numeric value '0' is not conveyed

Test 19: Decrement a slider to the minimum value

VoiceOver for macOS

Instructions

  1. Configure VoiceOver with default settings. For help, read Configuring Screen Readers for Testing.
  2. Activate the "Open test page" button, which opens the example to test in a new window and runs a script that sets focus on the slider.
  3. With focus on the 'Seek' slider, set its value to 0 Seconds. Do this with each of the following commands or command sequences.
    • Home

Home: 2 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Textual value '0 Seconds' is conveyed
MUST Numeric value '0' is not conveyed

Test 20: Increment a slider to the maximum value in interaction mode

JAWS

Instructions

  1. Configure JAWS with default settings. For help, read Configuring Screen Readers for Testing.
  2. Activate the "Open test page" button, which opens the example to test in a new window and runs a script that sets focus on the slider.
  3. With focus on the 'Seek' slider, set its value to 5 Minutes. Do this with each of the following commands or command sequences.
    • End

End: 2 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Textual value '5 Minutes' is conveyed
MUST Numeric value '300' is not conveyed

NVDA

Instructions

  1. Configure NVDA with default settings. For help, read Configuring Screen Readers for Testing.
  2. Activate the "Open test page" button, which opens the example to test in a new window and runs a script that sets focus on the slider.
  3. With focus on the 'Seek' slider, set its value to 5 Minutes. Do this with each of the following commands or command sequences.
    • End

End: 2 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Textual value '5 Minutes' is conveyed
MUST Numeric value '300' is not conveyed

Test 21: Increment a slider to the maximum value

VoiceOver for macOS

Instructions

  1. Configure VoiceOver with default settings. For help, read Configuring Screen Readers for Testing.
  2. Activate the "Open test page" button, which opens the example to test in a new window and runs a script that sets focus on the slider.
  3. With focus on the 'Seek' slider, set its value to 5 Minutes. Do this with each of the following commands or command sequences.
    • End

End: 2 MUST, 0 SHOULD, AND 0 MAY assertions

Priority Assertion Statement
MUST Textual value '5 Minutes' is conveyed
MUST Numeric value '300' is not conveyed